Puritas G7 – Heavy-Duty Floor Degreaser
High-Performance Oil, Fat & Industrial Soil Emulsifier
High-Impact Product Pitch
Engineered for demanding commercial kitchens, food processing facilities, and industrial environments, Puritas G7 is an alkaline, low-foaming heavy-duty degreaser that rapidly breaks down animal fats, mineral oils, grease, and stubborn tire marks. Its advanced emulsification chemistry lifts deeply embedded organic grime without leaving slippery film residues or damaging floor seals. Formulated specifically for single-disc scrubbers and automatic scrubber-driers, G7 maximizes mechanical cleaning efficiency while minimizing chemical consumption.
Key Features & Benefits
Rapid Fat & Oil Emulsification
Quickly saponifies and breaks down animal fats, vegetable oils, mineral grease, and heavy petroleum soils.
Low-Foaming Scrubber Formula
Optimized for high-speed automatic scrubber-driers and single-disc rotary machines to prevent foam-overflow and vacuum motor damage.
Residue-Free & Slip-Resistant
Leaves no greasy or soap film, restoring natural traction to commercial kitchen and factory floors.
Cost-Efficient Dilution
Concentrated formula delivers exceptional cleaning power at dilution rates as low as 20 ml per liter.
Solvent-Safe & Non-Flammable
Water-based alkaline formulation safe for indoor industrial application.
Multi-Surface Compatibility
Safe on unglazed ceramic, epoxy flooring, sealed concrete, vinyl (LVT), and terra cotta.
Target Facilities
- Commercial Kitchens, Bakeries & Food Processing Plants
- Automotive Workshops, Garages & Warehouses
- Shopping Malls, Transit Terminals & Industrial Plants
- Hotels, Restaurants & Banquet Facilities
Target Surfaces
- Quarry tiles, anti-skid kitchen ceramics, and unglazed tile floors
- Epoxy resin floor coatings and sealed concrete
- Vinyl tiles, LVT, linoleum, and synthetic sport surfaces
- Loading docks, parking bays, and high-traffic corridors
Step-by-Step Directions for Use
1. Manual Mopping & Surface Cleaning
- Dilute 50 ml of Puritas G7 per 1 liter of water in a mop bucket or machine tank.
- Apply the solution generously over the greasy area. Do not engage the vacuum recovery immediately.
- Allow 5 to 10 minutes dwell time for G7 to break down the grease matrix.
- Scrub thoroughly with a single-disc rotary machine or deck brush, then vacuum/mop up the slurry and rinse with clean water.
2. Machine Scrubbing (Scrubber-Driers)
- Dilute Puritas G7 at 20 ml to 30 ml per liter (1:50 to 1:33) of clean water in the scrubber solution tank.
- Scrub the floor using an appropriate pad or nylon brush depending on surface toughness.
- Vacuum up the emulsified slurry in the same pass.
G7🔍 Click image to enlarge preview
Interactive Dilution Calculator
Mixing Protocol:
🧪 Concentrate: 100 ml
💧 Fill water container up to the 5L mark (adds approx. 4.90L water)
Procurement & Orders
Puritas chemical concentrates are available for institutional supply. Order direct commercial 5L batches or request trial sample kits for facility verification.